Vivo V17 (1919) PD1948F Test Point | Reboot to EDL Mode 9008

by Sourabh

Have you received the Vivo V17 (PD1948F) smartphone? Then this guide will come in handy. If you bricked your device, misplaced your pattern lock details, or are unable to verify your Google account after a hard reset, you can quickly bypass it with this guide.

You can easily obtain the Vivo V17’s ISP PinOUT connection by following the full guide below, which includes images. You can easily restore the stock ROM, bypass FRP lock, or reset user data on your device using the ISP PinOUT and UFi Box. We will also show you how to reboot into 9008 EDL Mode in this guide.

What exactly is ISP PinOUT?

ISP, also known as in-circuit serial programming (ICSP), is a programming method for hardware that has a cross-reference of pins or contacts. You can power or signal the logic board (motherboard) of an electronic device, such as a mobile phone, by shorting the pins together. The IS Pinout connection is located on the logic board of your device. As a result, you’ll need to remove the handset’s back panel and refer to the image below to find the pinout.

How to Enable EDL Mode on the Vivo V17

To boot your device into EDL Mode, carefully follow these instructions (aka Emergency DownLoad Mode)

Method 1: Making Use of ADB

  1. Download ADB and Fastboot Tool and save them to your computer (C:/ Drive).
  2. Plug your device into your computer.
  3. Launch the adb command and type the command.
    adb restart edl

Method 2: Make Use of Fastboot

  1. Download ADB and Fastboot Tool and save them to your computer (C:/ Drive).
  2. Enter the bootloader on your device.
  3. Open a command window on your PC and navigate to the extracted folder (ADB and Fastboot Tool), then type the command.
    oem edl fastboot

Method 3: Restore Your Device Using Hardware Test Points

  1. Get the QDLoader driver.
  2. Locate your device’s EDL PinOUT/Test Point (refer to image above to find the test point)
  3. To enter EDL mode, short the points with a metal tweezer or a conductive metal wire.
  4. When you’re finished, connect your device to your PC with a USB cable.
    As a result, your device will enter EDL mode. You can now launch the QFil or QPST Tool and flash the firmware to restore your device.
    I hope this guide helped you locate the Vivo V17 PD1948F ISP Testpoints.

Read more Articles:

You may also like

Adblock Detected

Please support us by disabling your AdBlocker extension from your browsers for our website.